Newton s Second Law. ΣF = m a. (1) In this equation, ΣF is the sum of the forces acting on an object, m is the mass of


 Berniece Burns
 5 years ago
 Views:
Transcription
1 Newton s Second Law Objective The Newton s Second Law experiment provides the student a hands on demonstration of forces in motion. A formulated analysis of forces acting on a dynamics cart will be developed by the student. Students will calculate a theoretical acceleration value using their derived equation, and then compare their results to an experimental value. Equipment List PASCO Dynamics Cart with Track, Set of Hanging Masses, Two Photogates, PASCO Smart Timer, PASCO Photogate Sail, Table Clamp with Rod, Dynamics Track, Attach ment to connect Rod to Track, Two Photogate Track Braces, Angle Indicator for Track, Ruler, Nylon String, Bubble Level, mass scale. Theoretical Background In order to get a stalled car moving, one must push or exert a force on the car. Since the car goes from a state of being at rest to a state of motion, the car must be accelerated, since acceleration is a change in velocity (v i = 0; v f = v for an acceleration value a). The missing factor that relates the force to the acceleration can be deduced by considering that any one of us would prefer to push a VW Bug rather than an army Tank. The difference between the Bug and the Tank is, primarily, that the Tank is made of more stuff and is harder to get started. This resistance to motion, which is a measure of the amount of stuff something is made of, is known as mass. Mass, or inertial mass, is a measure of the resistance of an object to motion. This relationship was first postulated by Isaac Newton in his Second Law of Motion, ΣF = m a. (1) In this equation, ΣF is the sum of the forces acting on an object, m is the mass of
2 the object, and a is the acceleration of the object. Both F and a denote vector quantities. The standard representation for vectors is the symbol such as F for force with a small directional arrow over it. To use this equation to calculate the acceleration, all of the forces acting on an object must be added, in a vector sense, to get the total force acting on the object. Flat Track with Hanging Mass In the first case of this lab exercise, a cart is attached by a piece of string to another mass which is hung over the table supporting the cart track by a pulley so that as the hanging mass falls, it pulls the cart along the track. For this kind of problem, it is useful to draw a diagram of the forces acting on each of the masses involved in the problem. The experimental setup is shown in Figure 1. The forces acting on the cart and hanging mass are labelled in Figure 1. Freebody diagrams of the forces on the cart and hanging mass are provided in Figure 2. Figure 1: Forces on Dynamics Cart with Hanging Mass Figure 2: FreeBody Diagram of Forces on Cart and Hanging Mass
3 Since force is a vector quantity, it is necessary to decide what are the positive and negative directions so that each force can be labeled as being either positive or negative. A useful rule is to say that the direction of motion is the positive direction. This direction is indicated in both Figures 1 and 2. With this convention in place, equations for the total force acting on each object can be written down. For the cart, this equation is, ΣF cartx = T = M C a C (2) In this equation, F cartx is the total force on the cart in the horizontal, or xdirection, T is the tension in the string, which always pulls away from the mass in the direction of the string, M C is the mass of the dynamics cart, and a C is the acceleration of the cart in the horizontal direction. Since we do not expect the cart to lift off of the air track or collapse into the track, we can say that there is no net force acting in the vertical, or y, direction. This means that the normal force, n, must be balanced by the weight of the cart, M c g, so that n = M c g. To solve for the acceleration of the cart, from Equation 2, we need to know the tension in the string, T. To obtain the tension in the string, consider the forces acting on the hanging mass. From the forces illustrated in Figure 2, the following equation can be written down using Newton s second law, ΣF H = m H g T = m H a H (3) In this equation, all of the variables have the same meaning with the addition that F H is the total force on the hanging weight, m H is the mass of the hanging weight, and a H is the acceleration of the hanging weight. Since both the hanging mass and the dynamics cart are connected by the same piece of string, which is assumed not to stretch, the same tension acts on both. This tension is responsible for accelerating the cart. For the tension to be the same on both the dynamics cart and on the hanging mass, the acceleration of each must also be the same. To demonstrate that this is correct, consider what would happen if the acceleration was not the same for both. For example, if the dynamics cart was to accelerate progressively faster than the hanging mass, then the string would go limp resulting in no tension in the string. If the hanging mass was to accelerate progressively faster than the dynamics cart, then the string
4 would snap maximizing the hanger s fall due to gravity. Since the string connecting the two neither loosens nor breaks, the tension acting on each object must be the same, and the acceleration of each mass must also be the same. This will be examined during the lab exercise. The variable for tension, T is used in both equations 2 and 3 indicating a certain understanding of tension acting on both the cart and hanging mass. Since the acceleration is the same for both, the two accelerations, a C and a H, can be replaced by a single variable for the acceleration, a. Equations 2 and 3 can be rewritten as, M c a = T, (4) m H a = m H g T (5) Substituting the tension T in Equation 5 with the tension T from Equation 4, and solving for the acceleration (which is the same for both the hanging mass and the cart) gives, a theo1 = m H m H +M c g (6) Inclined Track with Hanging Mass In this case, a hanging mass attached to the cart on an inclined track is analyzed. Figure 3 illustrates the experimental situation and the forces acting on the cart and hanging mass. Freebody diagrams of the forces on the cart and hanging mass are shown in Figure 4. Figure 3: Inclined Track with Hanging Mass
5 Figure 4: FreeBody Diagram of Forces on Cart and Hanging Mass Adding the forces acting on the cart parallel to the track, as illustrated in Figure 4, and applying Newton s second law gives, ΣF = T M C g sin θ = M C a c. (7) In this case, the normal n is balanced by the component of the weight perpendicular to the track so that n = M C g cos θ. Adding the forces acting on the hanging mass and applying Newton s second law gives, ΣF H = m H g T = m H a H. (8) The magnitude of the acceleration of the hanging mass is the same as that for the cart since the hanging mass and the cart are attached by a string of constant tension, which is the same result stemming from the flat track case. Combining these two equations by eliminating the tension, and solving for the acceleration yields, a theo2 = m Hg M c g sin θ m H +M c (9) In this series of experiments, these theoretical relations for the acceleration will be tested experimentally.
6 Procedure Flat Track with Hanging Mass In this section, the acceleration of the cart on a flat track will be measured experimentally several times and averaged to obtain the average acceleration. The mass of the hanging weight will be varied, and the resulting acceleration measured repeatedly to obtain the average acceleration. 1. Use the mass scale to measure the mass of the dynamics cart and sail. Record this mass as M C on your data sheet. 2. Place 10 g on the hanging mass holder so that the total mass of the hanging weight, including the holder, is 15 g. Measure and record the actual mass of the hanging weight and record this value on your data table. 3. Determine the theoretical value for the acceleration using the mass values measured from steps 1 and 2 and Equation 6. Record this acceleration in the a theo 1 column of your data sheet. 4. Attach the hanging mass to the cart. Make sure the string is long enough so that the entire cart successfully goes through the photogate before the hanging mass hits the floor. 5. Make sure the track is not attached to the rod clamped to the table. If it is, remove it from the rod and lay it flat on the table. Place the cart on the track. Drape the hanging mass over the pulley. Adjust the height of the pulley so that the string is parallel to the track. 6. Use the bubble level to determine if the track is level. If the track is not level, adjust the small plastic screw at the end of the track to level the track. Consult with your lab instructor if difficulties arise during this process. 7. Adjust the photogates so that they are 30 cm apart. Adjust the heights of the photogates so that the they are triggered by the same portion of the photogate sail established during the Kinematics experiment. 8. Set the Smart Timer to the Accel: Two Gate mode. Pull the cart back along the track 25 cm away from the closest photogate, and press the black key on the Smart Timer to ready the timer. An asterisk (*) should appear on the display of the Smart Timer under the Accel: Two Gate. Do not press the black key until after you have pulled the cart through the photogate. 9. Release the cart. The acceleration of the cart, in cm/s 2, should appear on the Smart Timer. This value should be within 10 cm/s 2 of the theoretical value. If
7 it is not, have the lab instructor check your equipment. If it is, convert this to m/s 2 and record the value as a exp on your data sheet. 10. Repeat steps 8 and 9 four times to obtain a total of five experimental values for the acceleration. 11. Repeat steps 210, for hanging mass values of m H = 25 g, 35 g, and 45 g. For each value of the hanging weight, measure the acceleration of the cart five times. Be sure to measure the actual mass of the hanging weight for each trial. 12. For each value of the hanging mass, calculate the average value of the experimen tal acceleration. Record these average experimental accelerations in the a exp,ave column. 13. For each value of the hanging mass, calculate the percent variation in the experi mental values of the acceleration, a exp. Record these values in the space provided. Record the largest percent variation in a exp as the percent uncertainty in a exp for this experiment. 14. Estimate the uncertainty in the mass measurements. Inclined Track with Hanging Mass In this section, the acceleration of the cart on an inclined track will be measured experimentally. The mass of the hanging weight will be varied, and the resulting acceleration will be measured. 1. Attach the track to the rod clamped to the table. Incline the track to an angle of ~15 off the table. Determine the angle by measuring the height of the end of the track above the table, and apply the sin 1 (θ) to the ratio of this height to the length of the track to find θ. Record the measured angle on your data sheet. 2. Place 160 g on the hanging mass, for a total hanging mass of 165 g including the mass of the hanger. Measure the mass of the hanging mass and record this mass on your data sheet. 3. Determine the theoretical value for the acceleration using the mass of the cart and the hanging weight mass value with Equation 9. Record this acceleration in the a theo 2 column of your data sheet. 4. Place the cart on the track. Adjust the height of the pulley so that the string is parallel to the track. Adjust the height of the photogates so that they are triggered by the correct portion of the sail. 5. Set the Smart Timer to the Accel: Two Gate mode. Pull the cart back along the track 25 cm away from the closest photogate, and press the black key on
8 the Smart Timer to ready the timer. An asterisk (*) should appear on the display of the Smart Timer under the Accel: Two Gate. Do not press the black key until after you have pulled the cart through the photogate. 6. Release the cart. The acceleration of the cart, in cm/s 2, should appear on the Smart Timer. This value should be within 10 cm/s 2 of the theoretical value. If it is not, have the lab instructor check your equipment. If it is, convert this to m/s 2 and record the value as a exp on your data sheet. 7. Repeat steps 5 and 6 four times to obtain a total of five experimental values for the acceleration. 8. Repeat steps 17 for hanging mass values of m H = 175 g, 185 g, and 195 g. For each value of the hanging weight, measure the acceleration of the cart five times. Be sure to measure the actual mass of the hanging weight and record this mass on your data sheet. 9. For each value of the hanging mass, calculate the average value of the experimen tal acceleration. Record these average experimental accelerations in the a exp,ave column. 10. For each value of the hanging mass, calculate the percent variation in the experi mental values of the acceleration, a exp. Record these values in the space provided. Record the largest percent variation in a exp as the percent uncertainty in a exp for this experiment. 11. Estimate the uncertainty in the mass measurements. Data Analysis Flat Track with Hanging Mass 1. Calculate the percent difference between the theoretical and experimental values of the acceleration for each value of the hanging mass. m 2. Plot the experimental value of the acceleration a exp as a function of H. m H +M c Fit the data with a straight line. Determine the slope and yintercept of this line and record them on your data sheet. Inclined Track with Hanging Mass 1. Calculate the percent difference between the theoretical and experimental values of the acceleration for each value of the hanging mass.
9 2. Plot the experimental value of the acceleration a exp as a function of m H M c sin θ m H +M c. Fit the data with a straight line. Determine the slope and y intercept of this line and record them on your data sheet. Selected Questions 1. How would friction effect the experimental values of acceleration? Would friction be a source of systematic error or random error? Why? Explain your reasoning 2. If the pulley was not set so that the string was parallel to the track, what effect would this have on the acceleration of the system? What effect would this have on the normal force from the track? Would this be a random or systematic error? Explain your reasoning. 3. For the theoretical calculation of the acceleration, friction was ignored. Apply Newton s second law and derive an equation for the acceleration that would include a force of friction for the Flat Track case. Refer to equations 25 in the Theoretical Background section. Use your derived equation, and the first average experimental value of the acceleration for the Flat track case (m H = 15 g), to calculate the frictional force. How does this force of friction compare to the force pulling the cart along the track m H g? What do your calculations of friction suggest about the assumption that friction is negligible? Show your work! 4. For the theoretical calculation of the acceleration for the Inclined Track case, friction was also ignored. Apply Newton s second law and derive an equation for the acceleration that would include a force of friction for the Inclined Track case. Refer to equations 7 and 8 in the Theoretical Background section. Use your derived equation, and the first average experimental value of the acceleration for the Inclined Track case (m H = 165 g), to calculate the frictional force. For the Inclined Track case, what was the force that was pulling the cart? How does the force of friction compare to the force pulling the cart along the track for the Inclined Track case? What do your calculations of friction suggest about the assumption that friction is negligible? Show your work!
Conservation of Energy Physics Lab VI
Conservation of Energy Physics Lab VI Objective This lab experiment explores the principle of energy conservation. You will analyze the final speed of an air track glider pulled along an air track by a
More informationA Determination of g, the Acceleration Due to Gravity, from Newton's Laws of Motion
A Determination of g, the Acceleration Due to Gravity, from Newton's Laws of Motion Objective In the experiment you will determine the cart acceleration, a, and the friction force, f, experimentally for
More informationFRICTION, WORK, AND THE INCLINED PLANE
FRICTION, WORK, AND THE INCLINED PLANE Objective: To measure the coefficient of static and inetic friction between a bloc and an inclined plane and to examine the relationship between the plane s angle
More informationIf you put the same book on a tilted surface the normal force will be less. The magnitude of the normal force will equal: N = W cos θ
Experiment 4 ormal and Frictional Forces Preparation Prepare for this week's quiz by reviewing last week's experiment Read this week's experiment and the section in your textbook dealing with normal forces
More informationRotational Motion: Moment of Inertia
Experiment 8 Rotational Motion: Moment of Inertia 8.1 Objectives Familiarize yourself with the concept of moment of inertia, I, which plays the same role in the description of the rotation of a rigid body
More informationLAB 6: GRAVITATIONAL AND PASSIVE FORCES
55 Name Date Partners LAB 6: GRAVITATIONAL AND PASSIVE FORCES And thus Nature will be very conformable to herself and very simple, performing all the great Motions of the heavenly Bodies by the attraction
More informationv v ax v a x a v a v = = = Since F = ma, it follows that a = F/m. The mass of the arrow is unchanged, and ( )
Week 3 homework IMPORTANT NOTE ABOUT WEBASSIGN: In the WebAssign versions of these problems, various details have been changed, so that the answers will come out differently. The method to find the solution
More informationTwoBody System: Two Hanging Masses
Specific Outcome: i. I can apply Newton s laws of motion to solve, algebraically, linear motion problems in horizontal, vertical and inclined planes near the surface of Earth, ignoring air resistance.
More informationLAB 6  GRAVITATIONAL AND PASSIVE FORCES
L061 Name Date Partners LAB 6  GRAVITATIONAL AND PASSIVE FORCES OBJECTIVES And thus Nature will be very conformable to herself and very simple, performing all the great Motions of the heavenly Bodies
More informationExperiment: Static and Kinetic Friction
PHY 201: General Physics I Lab page 1 of 6 OBJECTIVES Experiment: Static and Kinetic Friction Use a Force Sensor to measure the force of static friction. Determine the relationship between force of static
More informationExperiment 9. The Pendulum
Experiment 9 The Pendulum 9.1 Objectives Investigate the functional dependence of the period (τ) 1 of a pendulum on its length (L), the mass of its bob (m), and the starting angle (θ 0 ). Use a pendulum
More informationChapter 4. Forces and Newton s Laws of Motion. continued
Chapter 4 Forces and Newton s Laws of Motion continued 4.9 Static and Kinetic Frictional Forces When an object is in contact with a surface forces can act on the objects. The component of this force acting
More informationAcceleration due to Gravity
Acceleration due to Gravity 1 Object To determine the acceleration due to gravity by different methods. 2 Apparatus Balance, ball bearing, clamps, electric timers, meter stick, paper strips, precision
More informationENERGYand WORK (PART I and II) 9MAC
ENERGYand WORK (PART I and II) 9MAC Purpose: To understand work, potential energy, & kinetic energy. To understand conservation of energy and how energy is converted from one form to the other. Apparatus:
More information5. Forces and MotionI. Force is an interaction that causes the acceleration of a body. A vector quantity.
5. Forces and MotionI 1 Force is an interaction that causes the acceleration of a body. A vector quantity. Newton's First Law: Consider a body on which no net force acts. If the body is at rest, it will
More informationCHAPTER 6 WORK AND ENERGY
CHAPTER 6 WORK AND ENERGY CONCEPTUAL QUESTIONS. REASONING AND SOLUTION The work done by F in moving the box through a displacement s is W = ( F cos 0 ) s= Fs. The work done by F is W = ( F cos θ). s From
More informationLaboratory Report Scoring and Cover Sheet
Laboratory Report Scoring and Cover Sheet Title of Lab _Newton s Laws Course and Lab Section Number: PHY 1103100 Date _23 Sept 2014 Principle Investigator _Thomas Edison CoInvestigator _Nikola Tesla
More informationLab 7: Rotational Motion
Lab 7: Rotational Motion Equipment: DataStudio, rotary motion sensor mounted on 80 cm rod and heavy duty bench clamp (PASCO ME9472), string with loop at one end and small white bead at the other end (125
More information5.1 The First Law: The Law of Inertia
The First Law: The Law of Inertia Investigation 5.1 5.1 The First Law: The Law of Inertia How does changing an object s inertia affect its motion? Newton s first law states that objects tend to keep doing
More informationKinetic Friction. Experiment #13
Kinetic Friction Experiment #13 Joe Solution E01234567 Partner Jane Answers PHY 221 Lab Instructor Nathaniel Franklin Wednesday, 11 AM1 PM Lecture Instructor Dr. Jacobs Abstract The purpose of this
More informationSimple Harmonic Motion
Simple Harmonic Motion 1 Object To determine the period of motion of objects that are executing simple harmonic motion and to check the theoretical prediction of such periods. 2 Apparatus Assorted weights
More informationCentripetal Force. This result is independent of the size of r. A full circle has 2π rad, and 360 deg = 2π rad.
Centripetal Force 1 Introduction In classical mechanics, the dynamics of a point particle are described by Newton s 2nd law, F = m a, where F is the net force, m is the mass, and a is the acceleration.
More informationLecture 6. Weight. Tension. Normal Force. Static Friction. Cutnell+Johnson: 4.84.12, second half of section 4.7
Lecture 6 Weight Tension Normal Force Static Friction Cutnell+Johnson: 4.84.12, second half of section 4.7 In this lecture, I m going to discuss four different kinds of forces: weight, tension, the normal
More informationTEACHER ANSWER KEY November 12, 2003. Phys  Vectors 11132003
Phys  Vectors 11132003 TEACHER ANSWER KEY November 12, 2003 5 1. A 1.5kilogram lab cart is accelerated uniformly from rest to a speed of 2.0 meters per second in 0.50 second. What is the magnitude
More informationExamples of Scalar and Vector Quantities 1. Candidates should be able to : QUANTITY VECTOR SCALAR
Candidates should be able to : Examples of Scalar and Vector Quantities 1 QUANTITY VECTOR SCALAR Define scalar and vector quantities and give examples. Draw and use a vector triangle to determine the resultant
More informationPHYSICS 111 HOMEWORK SOLUTION, week 4, chapter 5, sec 17. February 13, 2013
PHYSICS 111 HOMEWORK SOLUTION, week 4, chapter 5, sec 17 February 13, 2013 0.1 A 2.00kg object undergoes an acceleration given by a = (6.00î + 4.00ĵ)m/s 2 a) Find the resultatnt force acting on the object
More informationGeneral Physics Lab: Atwood s Machine
General Physics Lab: Atwood s Machine Introduction One may study Newton s second law using a device known as Atwood s machine, shown below. It consists of a pulley and two hanging masses. The difference
More informationSTATIC AND KINETIC FRICTION
STATIC AND KINETIC FRICTION LAB MECH 3.COMP From Physics with Computers, Vernier Software & Technology, 2000. INTRODUCTION If you try to slide a heavy box resting on the floor, you may find it difficult
More informationPHYS 2425 Engineering Physics I EXPERIMENT 9 SIMPLE HARMONIC MOTION
PHYS 2425 Engineering Physics I EXPERIMENT 9 SIMPLE HARMONIC MOTION I. INTRODUCTION The objective of this experiment is the study of oscillatory motion. In particular the springmass system and the simple
More informationNewton s Law of Motion
chapter 5 Newton s Law of Motion Static system 1. Hanging two identical masses Context in the textbook: Section 5.3, combination of forces, Example 4. Vertical motion without friction 2. Elevator: Decelerating
More informationGENERAL SCIENCE LABORATORY 1110L Lab Experiment 3: PROJECTILE MOTION
GENERAL SCIENCE LABORATORY 1110L Lab Experiment 3: PROJECTILE MOTION Objective: To understand the motion of a projectile in the earth s gravitational field and measure the muzzle velocity of the projectile
More informationRotational Inertia Demonstrator
WWW.ARBORSCI.COM Rotational Inertia Demonstrator P33545 BACKGROUND: The Rotational Inertia Demonstrator provides an engaging way to investigate many of the principles of angular motion and is intended
More informationAP Physics Applying Forces
AP Physics Applying Forces This section of your text will be very tedious, very tedious indeed. (The Physics Kahuna is just as sorry as he can be.) It s mostly just a bunch of complicated problems and
More informationFREE FALL. Introduction. Reference Young and Freedman, University Physics, 12 th Edition: Chapter 2, section 2.5
Physics 161 FREE FALL Introduction This experiment is designed to study the motion of an object that is accelerated by the force of gravity. It also serves as an introduction to the data analysis capabilities
More informationWorksheet #1 Free Body or Force diagrams
Worksheet #1 Free Body or Force diagrams Drawing FreeBody Diagrams Freebody diagrams are diagrams used to show the relative magnitude and direction of all forces acting upon an object in a given situation.
More informationPhysics: Principles and Applications, 6e Giancoli Chapter 4 Dynamics: Newton's Laws of Motion
Physics: Principles and Applications, 6e Giancoli Chapter 4 Dynamics: Newton's Laws of Motion Conceptual Questions 1) Which of Newton's laws best explains why motorists should buckleup? A) the first law
More informationAP1 Oscillations. 1. Which of the following statements about a springblock oscillator in simple harmonic motion about its equilibrium point is false?
1. Which of the following statements about a springblock oscillator in simple harmonic motion about its equilibrium point is false? (A) The displacement is directly related to the acceleration. (B) The
More informationNewton s Laws. Physics 1425 lecture 6. Michael Fowler, UVa.
Newton s Laws Physics 1425 lecture 6 Michael Fowler, UVa. Newton Extended Galileo s Picture of Galileo said: Motion to Include Forces Natural horizontal motion is at constant velocity unless a force acts:
More informationChapter 5 Using Newton s Laws: Friction, Circular Motion, Drag Forces. Copyright 2009 Pearson Education, Inc.
Chapter 5 Using Newton s Laws: Friction, Circular Motion, Drag Forces Units of Chapter 5 Applications of Newton s Laws Involving Friction Uniform Circular Motion Kinematics Dynamics of Uniform Circular
More informationTorque and Rotary Motion
Torque and Rotary Motion Name Partner Introduction Motion in a circle is a straightforward extension of linear motion. According to the textbook, all you have to do is replace displacement, velocity,
More informationPhysics 2048 Test 1 Solution (solutions to problems 25 are from student papers) Problem 1 (Short Answer: 20 points)
Physics 248 Test 1 Solution (solutions to problems 25 are from student papers) Problem 1 (Short Answer: 2 points) An object's motion is restricted to one dimension along the distance axis. Answer each
More informationSolving Simultaneous Equations and Matrices
Solving Simultaneous Equations and Matrices The following represents a systematic investigation for the steps used to solve two simultaneous linear equations in two unknowns. The motivation for considering
More informationPendulum Force and Centripetal Acceleration
Pendulum Force and Centripetal Acceleration 1 Objectives 1. To calibrate and use a force probe and motion detector. 2. To understand centripetal acceleration. 3. To solve force problems involving centripetal
More informationPhysics 2A, Sec B00: Mechanics  Winter 2011 Instructor: B. Grinstein Final Exam
Physics 2A, Sec B00: Mechanics  Winter 2011 Instructor: B. Grinstein Final Exam INSTRUCTIONS: Use a pencil #2 to fill your scantron. Write your code number and bubble it in under "EXAM NUMBER;" an entry
More informationB) 286 m C) 325 m D) 367 m Answer: B
Practice Midterm 1 1) When a parachutist jumps from an airplane, he eventually reaches a constant speed, called the terminal velocity. This means that A) the acceleration is equal to g. B) the force of
More informationWork and Energy. W =!KE = KE f
Activity 19 PS2826 Work and Energy Mechanics: workenergy theorem, conservation of energy GLX setup file: work energy Qty Equipment and Materials Part Number 1 PASPORT Xplorer GLX PS2002 1 PASPORT Motion
More informationKinetic Friction. Experiment #13
Kinetic Friction Experiment #13 Joe Solution E00123456 Partner  Jane Answers PHY 221 Lab Instructor Chuck Borener Thursday, 11 AM 1 PM Lecture Instructor Dr. Jacobs Abstract In this experiment, we test
More informationPAScar Accessory Track Set (1.2m version)
Includes Teacher's Notes and Typical Experiment Results Instruction Manual and Experiment Guide for the PASCO scientific Model ME6955 01207557A 1/01 PAScar Accessory Track Set (1.2m version) Model ME9435
More informationProving the Law of Conservation of Energy
Table of Contents List of Tables & Figures: Table 1: Data/6 Figure 1: Example Diagram/4 Figure 2: Setup Diagram/8 1. Abstract/2 2. Introduction & Discussion/3 3. Procedure/5 4. Results/6 5. Summary/6 Proving
More informationLab 2: Vector Analysis
Lab 2: Vector Analysis Objectives: to practice using graphical and analytical methods to add vectors in two dimensions Equipment: Meter stick Ruler Protractor Force table Ring Pulleys with attachments
More informationAt the skate park on the ramp
At the skate park on the ramp 1 On the ramp When a cart rolls down a ramp, it begins at rest, but starts moving downward upon release covers more distance each second When a cart rolls up a ramp, it rises
More informationCOEFFICIENT OF KINETIC FRICTION
COEFFICIENT OF KINETIC FRICTION LAB MECH 5.COMP From Physics with Computers, Vernier Software & Technology, 2000. INTRODUCTION If you try to slide a heavy box resting on the floor, you may find it difficult
More informationConceptual Questions: Forces and Newton s Laws
Conceptual Questions: Forces and Newton s Laws 1. An object can have motion only if a net force acts on it. his statement is a. true b. false 2. And the reason for this (refer to previous question) is
More informationAP Physics  Chapter 8 Practice Test
AP Physics  Chapter 8 Practice Test Multiple Choice Identify the choice that best completes the statement or answers the question. 1. A single conservative force F x = (6.0x 12) N (x is in m) acts on
More informationWhen showing forces on diagrams, it is important to show the directions in which they act as well as their magnitudes.
When showing forces on diagrams, it is important to show the directions in which they act as well as their magnitudes. mass M, the force of attraction exerted by the Earth on an object, acts downwards.
More informationWeight The weight of an object is defined as the gravitational force acting on the object. Unit: Newton (N)
Gravitational Field A gravitational field as a region in which an object experiences a force due to gravitational attraction Gravitational Field Strength The gravitational field strength at a point in
More informationMULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) Vector A has length 4 units and directed to the north. Vector B has length 9 units and is directed
More information9. The kinetic energy of the moving object is (1) 5 J (3) 15 J (2) 10 J (4) 50 J
1. If the kinetic energy of an object is 16 joules when its speed is 4.0 meters per second, then the mass of the objects is (1) 0.5 kg (3) 8.0 kg (2) 2.0 kg (4) 19.6 kg Base your answers to questions 9
More informationWork Energy & Power. September 2000 Number 05. 1. Work If a force acts on a body and causes it to move, then the force is doing work.
PhysicsFactsheet September 2000 Number 05 Work Energy & Power 1. Work If a force acts on a body and causes it to move, then the force is doing work. W = Fs W = work done (J) F = force applied (N) s = distance
More informationSimple Harmonic Motion Experiment. 1 f
Simple Harmonic Motion Experiment In this experiment, a motion sensor is used to measure the position of an oscillating mass as a function of time. The frequency of oscillations will be obtained by measuring
More informationLecture 07: Work and Kinetic Energy. Physics 2210 Fall Semester 2014
Lecture 07: Work and Kinetic Energy Physics 2210 Fall Semester 2014 Announcements Schedule next few weeks: 9/08 Unit 3 9/10 Unit 4 9/15 Unit 5 (guest lecturer) 9/17 Unit 6 (guest lecturer) 9/22 Unit 7,
More informationChapter 11 Equilibrium
11.1 The First Condition of Equilibrium The first condition of equilibrium deals with the forces that cause possible translations of a body. The simplest way to define the translational equilibrium of
More informationPhysics Lab Report Guidelines
Physics Lab Report Guidelines Summary The following is an outline of the requirements for a physics lab report. A. Experimental Description 1. Provide a statement of the physical theory or principle observed
More information2. To set the number of data points that will be collected, type n.
Force and Motion In this experiment, you will explore the relationship between force and motion. You are given a car with tabs, a string, a pully, a weight hanger, some weights, and the laser gate you
More informationC B A T 3 T 2 T 1. 1. What is the magnitude of the force T 1? A) 37.5 N B) 75.0 N C) 113 N D) 157 N E) 192 N
Three boxes are connected by massless strings and are resting on a frictionless table. Each box has a mass of 15 kg, and the tension T 1 in the right string is accelerating the boxes to the right at a
More informationChapter 6 Work and Energy
Chapter 6 WORK AND ENERGY PREVIEW Work is the scalar product of the force acting on an object and the displacement through which it acts. When work is done on or by a system, the energy of that system
More informationLab 8: Ballistic Pendulum
Lab 8: Ballistic Pendulum Equipment: Ballistic pendulum apparatus, 2 meter ruler, 30 cm ruler, blank paper, carbon paper, masking tape, scale. Caution In this experiment a steel ball is projected horizontally
More informationExperiment 4. Vector Addition: The Force Table
ETSU Physics and Astronomy Technical Physics Lab Exp 4 Page 29 Experiment 4. Vector Addition: The Force Table As we have learned in lecture, to the extent that pulleys are massless and frictionless, they
More informationEXPERIMENT 3 Analysis of a freely falling body Dependence of speed and position on time Objectives
EXPERIMENT 3 Analysis of a freely falling body Dependence of speed and position on time Objectives to verify how the distance of a freelyfalling body varies with time to investigate whether the velocity
More informationPhysics 11 Assignment KEY Dynamics Chapters 4 & 5
Physics Assignment KEY Dynamics Chapters 4 & 5 ote: for all dynamics problemsolving questions, draw appropriate free body diagrams and use the aforementioned problemsolving method.. Define the following
More information6. Block and Tackle* Block and tackle
6. Block and Tackle* A block and tackle is a combination of pulleys and ropes often used for lifting. Pulleys grouped together in a single frame make up what is called a pulley block. The tackle refers
More informationChapter 07 Test A. Name: Class: Date: Multiple Choice Identify the choice that best completes the statement or answers the question.
Class: Date: Chapter 07 Test A Multiple Choice Identify the choice that best completes the statement or answers the question. 1. An example of a vector quantity is: a. temperature. b. length. c. velocity.
More informationOne and Twodimensional Motion
PHYS101 LAB02 One and Twodimensional Motion 1. Objective The objectives of this experiment are: to measure the acceleration of gravity using onedimensional motion to demonstrate the independence of
More informationForce on Moving Charges in a Magnetic Field
[ Assignment View ] [ Eðlisfræði 2, vor 2007 27. Magnetic Field and Magnetic Forces Assignment is due at 2:00am on Wednesday, February 28, 2007 Credit for problems submitted late will decrease to 0% after
More informationSample Questions for the AP Physics 1 Exam
Sample Questions for the AP Physics 1 Exam Sample Questions for the AP Physics 1 Exam Multiplechoice Questions Note: To simplify calculations, you may use g 5 10 m/s 2 in all problems. Directions: Each
More informationPrelab Exercises: Hooke's Law and the Behavior of Springs
59 Prelab Exercises: Hooke's Law and the Behavior of Springs Study the description of the experiment that follows and answer the following questions.. (3 marks) Explain why a mass suspended vertically
More informationObjective: Equilibrium Applications of Newton s Laws of Motion I
Type: Single Date: Objective: Equilibrium Applications of Newton s Laws of Motion I Homework: Assignment (111) Read (4.14.5, 4.8, 4.11); Do PROB # s (46, 47, 52, 58) Ch. 4 AP Physics B Mr. Mirro Equilibrium,
More informationDetermining the Acceleration Due to Gravity
Chabot College Physics Lab Scott Hildreth Determining the Acceleration Due to Gravity Introduction In this experiment, you ll determine the acceleration due to earth s gravitational force with three different
More informationSeries and Parallel Resistive Circuits Physics Lab VIII
Series and Parallel Resistive Circuits Physics Lab VIII Objective In the set of experiments, the theoretical expressions used to calculate the total resistance in a combination of resistors will be tested
More informationMagnetic Force on a CurrentCarrying Wire Warm Up
Magnet Force on Current1 Magnetic Force on a CurrentCarrying Wire Warm Up 1. Forces on magnets Assume that we have a magnet of mass m 1 sitting on a scale (force meter 1), situation A. For this configuration
More informationACCELERATION DUE TO GRAVITY
ACCELERATION DUE TO GRAVITY Objective: To measure the acceleration of a freely falling body due to gravitational attraction. Apparatus: Computer with Logger Pro, green Vernier interface box, picket fence
More informationPhysics 125 Practice Exam #3 Chapters 67 Professor Siegel
Physics 125 Practice Exam #3 Chapters 67 Professor Siegel Name: Lab Day: 1. A concrete block is pulled 7.0 m across a frictionless surface by means of a rope. The tension in the rope is 40 N; and the
More informationcircular motion & gravitation physics 111N
circular motion & gravitation physics 111N uniform circular motion an object moving around a circle at a constant rate must have an acceleration always perpendicular to the velocity (else the speed would
More informationHOOKE S LAW AND SIMPLE HARMONIC MOTION
HOOKE S LAW AND SIMPLE HARMONIC MOTION Alexander Sapozhnikov, Brooklyn College CUNY, New York, alexs@brooklyn.cuny.edu Objectives Study Hooke s Law and measure the spring constant. Study Simple Harmonic
More informationChapter 3.8 & 6 Solutions
Chapter 3.8 & 6 Solutions P3.37. Prepare: We are asked to find period, speed and acceleration. Period and frequency are inverses according to Equation 3.26. To find speed we need to know the distance traveled
More informationThe purposes of this experiment are to test Faraday's Law qualitatively and to test Lenz's Law.
260 171 I. THEORY EXPERIMENT 17 QUALITATIVE STUDY OF INDUCED EMF Along the extended central axis of a bar magnet, the magnetic field vector B r, on the side nearer the North pole, points away from this
More informationAP Physics 1 and 2 Lab Investigations
AP Physics 1 and 2 Lab Investigations Student Guide to Data Analysis New York, NY. College Board, Advanced Placement, Advanced Placement Program, AP, AP Central, and the acorn logo are registered trademarks
More informationIdeal Cable. Linear Spring  1. Cables, Springs and Pulleys
Cables, Springs and Pulleys ME 202 Ideal Cable Neglect weight (massless) Neglect bending stiffness Force parallel to cable Force only tensile (cable taut) Neglect stretching (inextensible) 1 2 Sketch a
More informationSolution Derivations for Capa #11
Solution Derivations for Capa #11 1) A horizontal circular platform (M = 128.1 kg, r = 3.11 m) rotates about a frictionless vertical axle. A student (m = 68.3 kg) walks slowly from the rim of the platform
More informationSerway_ISM_V1 1 Chapter 4
Serway_ISM_V1 1 Chapter 4 ANSWERS TO MULTIPLE CHOICE QUESTIONS 1. Newton s second law gives the net force acting on the crate as This gives the kinetic friction force as, so choice (a) is correct. 2. As
More informationCopyright 2011 Casa Software Ltd. www.casaxps.com. Centre of Mass
Centre of Mass A central theme in mathematical modelling is that of reducing complex problems to simpler, and hopefully, equivalent problems for which mathematical analysis is possible. The concept of
More informationChapter 4: Newton s Laws: Explaining Motion
Chapter 4: Newton s Laws: Explaining Motion 1. All except one of the following require the application of a net force. Which one is the exception? A. to change an object from a state of rest to a state
More informationChapter 5 Newton s Laws of Motion
I do not know what I may appear to the world/ but to myself I seem to have been only like a boy playing on the sea shore, and diverting myself in now and then finding a smoother pebble or a prettier shell
More informationforce (mass)(acceleration) or F ma The unbalanced force is called the net force, or resultant of all the forces acting on the system.
4 Forces 41 Forces and Acceleration Vocabulary Force: A push or a pull. When an unbalanced force is exerted on an object, the object accelerates in the direction of the force. The acceleration is proportional
More informationChapter 18 Static Equilibrium
Chapter 8 Static Equilibrium 8. Introduction Static Equilibrium... 8. Lever Law... Example 8. Lever Law... 4 8.3 Generalized Lever Law... 5 8.4 Worked Examples... 7 Example 8. Suspended Rod... 7 Example
More informationVELOCITY, ACCELERATION, FORCE
VELOCITY, ACCELERATION, FORCE velocity Velocity v is a vector, with units of meters per second ( m s ). Velocity indicates the rate of change of the object s position ( r ); i.e., velocity tells you how
More informationTennessee State University
Tennessee State University Dept. of Physics & Mathematics PHYS 2010 CF SU 2009 Name 30% Time is 2 hours. Cheating will give you an Fgrade. Other instructions will be given in the Hall. MULTIPLE CHOICE.
More informationUnit 3 Work and Energy Suggested Time: 25 Hours
Unit 3 Work and Energy Suggested Time: 25 Hours PHYSICS 2204 CURRICULUM GUIDE 55 DYNAMICS Work and Energy Introduction When two or more objects are considered at once, a system is involved. To make sense
More informationIn order to describe motion you need to describe the following properties.
Chapter 2 One Dimensional Kinematics How would you describe the following motion? Ex: random 1D path speeding up and slowing down In order to describe motion you need to describe the following properties.
More informationwww.mathsbox.org.uk Displacement (x) Velocity (v) Acceleration (a) x = f(t) differentiate v = dx Acceleration Velocity (v) Displacement x
Mechanics 2 : Revision Notes 1. Kinematics and variable acceleration Displacement (x) Velocity (v) Acceleration (a) x = f(t) differentiate v = dx differentiate a = dv = d2 x dt dt dt 2 Acceleration Velocity
More information